Initializing the Device
Prerequisites
- Make sure that the Device is connected to the power supply.
- Make sure that the Device is connected to the computer, and the IP addresses of
the computer and the Device are on the same segment.
- Device initialization is required for first-time use or after the Device has
been reset.
- Plan the network segment properly to connect the Device to the network.
- By default, DHCP is enabled on the Device. When connected to a network, the
Device typically obtains an IP address from a DHCP server, and then you can
obtain the IP address of the Device from the upstream device, such as a router.
If a DHCP server is not available, the IP address of the Device is 192.168.1.110
by default.
NOTE
Procedure
-
Open the browser, enter the IP address of the Device in the address bar, and
then press the Enter key.
-
Select the language and then click Next.
-
Read the legal statement, select I have read and agree to the terms
of the Software License Agreement and Privacy Policy, and then
click Next.
-
Configure the password.
- The default username is admin.
- Configure a high security password according to the prompt of password
strength. A password should be 8-32 characters containing at least two
types among numbers, letters and common characters (any visible
characters other than' " ; : &).
-
Click Complete.