12V power supply in enclosure
Please note: Not all products are currently visible in this filter. We are working to update this as soon as possible. Click this notification for an overview.
BYSECUR BSC27732
BYSECUR 12v 4a power supply certified grade 3 large metal enclosure 400x300x90mm, 12v 4a output voltage, current-limited and short-circuit protected, battery charging output, 13.8 v p, for charging and individual monitoring of 2, 12v 18 amp. batteries, alarm outputs for mains failure, batteries, output voltage failure, general fault and tamper., enclosure made from 1.2 mm steel sheet with epoxy paint ral 7035, dimensions 400x300x90 mm
More info
IZYX SYSTEMS PSX100-1203
IZYX SYSTEMS PSX100 metal charger (UP) in metal box, 230V AC / 12V DC (13.8V) / 3A, 164 x 244 x 74 mm, status lights on the front.
More info
IZYX SYSTEMS ACM1-1205TS
IZYX SYSTEMS ACM1 metal power supply, 230V AC / 12V DC (13.8) / 5A, 1 board, horizontal or vertical installation.
More info
Sewosy AD1205R-N
Sewosy, 12 VDC / 5A switching mode power supply in metal housing 264x196x73.8mm (WxHxD).
More info
Pulsar HPSBH-12V3A-B
Pulsar, 13,8V/3A/7Ah switched mode power supply with battery backup in ABS IP44 enclosure.
More info
Vauban COFFRET-220-2M
Vauban Systems coffret mural pour 2 modules alimentation 220V sorties 3A+2A sans batterie
More info
Inim Isopower/B5
Inim switched mode power supply with bus supervision for connection to PRIME and PRIMEX alarm panels, but can also be used as a stand-alone power supply. 12 VDC 5A + 1.2A for battery, in housng 375 x 466 x 92 mm. Space for 1 x 18Ah battery. The Isopower features an I-bus isolator. In addition to the bus supervision, the Isopower has 1 permanent 12Vdc output, two 12Vdc outputs controlled by events on the alarm panel, three O/C outputs for signaling faults (= mains fault, overload and general fault) to external devices, front panel with 6 signaling LED's. EN50131-1, EN50131-6 and INCERT certified
More info
Sewosy ADCCTVS1205-08
Sewosy switching mode power supply, 12VDC, 5A.
More info
Inim Isopower/B2
Inim switched mode power supply with bus supervision for connection to PRIME and PRIMEX alarm panels, but can also be used as a stand-alone power supply. 12 VDC 2A + 1.2A for battery, in housing 275 x 374 x 86 mm. Space for 1 x 7Ah battery. The Isopower features an I-bus isolator. In addition to the bus supervision, the Isopower has 1 permanent 12Vdc output, two 12Vdc outputs controlled by events on the alarm panel, three O/C outputs for signaling faults (= mains fault, overload and general fault) to external devices, front panel with 6 signaling LED's. EN50131-1, EN50131-6 and INCERT certified
More info
Vauban COFFRET-220-1M
Vauban Systems coffret mural 1 module avec alimentation 220V sorties 3A+2A sans batterie
More info
Inim BPS12160G
Inim, switched-mode 12 VDC power supply 5A + 1.2A for Battery, in case 497 x 380 x 87mm Place 2 x 17Ah Battery.
More info
Inim BPS12060S
Inim, switched-mode 12 VDC power supply 3A in housing 325 x 325 x 80mm. Place 2 x 7Ah Battery.
More info
Paxton 857-250-NL
Paxton, Power 12 VDC 2A in a plastic housing. This power supply uses a 230 VAC socket. Note: power cable is included, but no 230 VAC plug, which can be ordered separately: 20070099.
More info
Sewosy AD1203GR
Sewosy, 12 VDC / 3A switched mode power supply in metal housing 295x195x90mm (WxHxD).
More info
Sewosy AD1205GR
Sewosy, 12 VDC / 5A switching mode power supply in metal housing 295x195x90mm (WxHxD).
More info