Filters: Interface modules
Please note: Not all products are currently visible in this filter. We are working to update this as soon as possible. Click this notification for an overview.
Ajax EN54 I/O Module (2X2)-B
Ajax EN54 I/O Module (2X2) Jeweller, Black. Wireless module with two inputs and two outputs for a fire alarm system. Battery 2x CR123A
More info
Notifier 020-553
[208554045] RS485 communication card for IDR2A remote repeaters.
More info
Morley MI-DMM2IE
Morley Addressable monitor module for MorleyIAS analogue system, with two supervised inputs for signalling the status of external equipment that provides a normally open contact, identifying itself at the control panel with a personalised message (closed door, flow detector, etc.). Incorporates short circuit isolator. Easy steering by means of two decadian rotary switches placed both on the front of the module and on the side (accessible and visible in DIN rail mounting). It occupies two consecutive addresses. It has two tricolor LEDs, one for each input (green: flashes when the equipment is asked; red: solid on alarm; yellow: flashes due to fault in the input circuit). Connected by removable terminals (up to 2.5mm2 in section). Multiple mounting possibilities: On the surface via M200SMB or SMB6-V0 box.
[208553018]
More info
KIDDE N-IO-SBX-2G
KIDDE enclosure for 1 module with din rail (large), multiple pg 29 cable entry points from all sides, preinstalled din rail for easy module installation, preinstalled cable shield terminal, splash-proof. impact-resistant ik08, easy surface mounting. halogen-free
More info
Notifier MMX-10ME
Notifier Addressable monitor module with 10 supervised inputs. CLIP and OPAL protocols. [208552004]
More info
Notifier 020-579
Notifier Notifier 4.5 or 7A power supply for ID3000 series power plants. [208554009]
More info
Notifier M721E
Notifier Addressable monitor and control module. It has 2 supervised input circuits for monitoring alarm equipment and technical signals with voltage-free contacts and 1 relay output circuit with voltage-free contacts. It incorporates a loop short-circuit insulating circuit, LEDs for module status indication, a decadian direction selector (01-159) and a DIN guide anchoring system. Allows surface mounting with M200SMB or SMB6-V0 box. Compatible with OPAL 159+159 and CLIP 99+99 protocols. [208554035]
More info
Notifier CMX-10RME
Notifier Addressable control module with 10 outputs in NA/NC relay form. CLIP and OPAL protocols. [208552005]
More info
Bosch FLM-430-I2M1
Bosch FLM-430-I2M1 interface module with 2 inputs and 1 supervised output for conventional signaling devices. Attention: module only applicable on AVENAR panels with minimum firmware V4.xx
More info
Neutronic TZ5BR
Neutronic TZ5BR relay box for threat alarm, battery-powered, addressable, wireless connected
More info
Inim IPGE-EXP24
Inim IPGE-EXP24 is designed as an expansion module for the IPGE06 or IPGE18 base station for emergency microphones. The IPGE-EXP24 module offers the same performance as the base station, but also allows the module to be installed in special metal enclosures (IPGECAB-D or IPGECAB-DR). Each base station can control up to 63 expansion units, which can be configured to select and activate zones or groups of zones, ensuring comprehensive and reliable control even in critical situations.
More info
Neutronic TZ5TR
Neutronic TZ5TR transponder system for threat alarm, battery-powered, addressable, wireless connected
More info
Ajax Type4 I/O Module (2x2)-B
Ajax Type4 I/O Module (2X2) Jeweller, Black. Wireless module with two inputs and two outputs for a fire alarm system. Battery 2x CR123A
More info
Notifier HOP-433-100
Notifier 2-loop analog module (includes Opal/AP protocol, 159+159) [208554072]
More info