Filters: Interface modules
Please note: Not all products are currently visible in this filter. We are working to update this as soon as possible. Click this notification for an overview.
Notifier LIB-8200
Notifier 2-pin expansion card for AM-8200. Standard interface. Includes Advanced Opal and Clip operating protocol adding up to 700 logic addresses in total and 750mA of load. [208554050]
More info
KIDDE KE-IO3101
KIDDE intelligent addressable module, 1 output with isolator, loop powered. provides an addressable volt-free changeover relay output, programmable no/nc. output relay with magnetic latch, freely programmable. din rail or wall mounted, local test functions, clear local indication of operating status
More info
Notifier NFXI-RM6
Notifier Addressable control module with 6 outputs in NA/NC relay form. CLIP and OPAL protocols. [208554014]
More info
KIDDE GBX2000
KIDDE galvanic isolator for conventional systems, certified with the iu2055 monitor module, eex ia iic output. tolerance 1%. device installation permitted in zone 2, protected against reverse polarity, emc in accordance with namur ne 21 standard, sil2 certification in accordance with iec 61508 standard
More info
Notifier SIB-8200
Notifier Communications card with RJ45 Ethernet port to connect the AM-8200 to the TG graphics program. [208554038]
More info
Morley MI-D2ICMOE
Morley Monitor and addressable control module with 2 supervised inputs and 1 relay output. [208553019]
More info
KIDDE KE-IU3111-ZME
KIDDE intelligent addressable module, with isolator, external power supply, allows installation of the maximum number of devices on the loop, provides an addressable conventional zone. full zone supervision, supports cleanme™, detector only, pul only and mixed zones, wall/din mounting. local test functions, 32 conventional devices or 20 detectors in intrinsically safe configurations
More info
Neutronic TZ4BR
Neutronic TZ4BR relay box Type 4, battery-powered, addressable, wireless connected
More info
Notifier STS3REL
[209954026] 3 relay card for SMART3 GC and SMART3NC detectors, configurable to 12 or 24 Vdc.
More info
Notifier IIG4N
Notifier Module with 4 inputs for 4-20 mA signals from gas detectors. It occupies 12 directions. CLIP protocol. [208554069]
More info
Neutronic TZCTR
Neutronic TZCTR transponder for technical smoke detection, addressable, wireless connected
More info
Neutronic TXTR
Neutronic TXTR transponder for extending the range of addressable wireless devices in radio addressable technical smoke detection
More info
Notifier M701E
Notifier Addressable control module for the activation of signalling systems, doors, fire dampers, solenoids, etc. It has 1 configurable output circuit, by means of a microswitch, as a supervised output with RFL or in relay form with voltage-free contacts. It incorporates a loop short-circuit insulating circuit, LEDs for module status indication, a decadian direction selector (01-159) and a DIN guide anchoring system. Allows surface mounting with M200SMB or SMB6-V0 box.
Compatible with OPAL 159+159 and CLIP 99+99 protocols. [208554036]
More info
Notifier M200E-DIN
Notifier Bracket for mounting a single standard M7xx or MI-Dxxx series module, directly on a standard DIN guide section. [208554032]
More info
Notifier M701E-240
Notifier Addressable control module 240Vac for surface mounting. CLIP and OPAL protocols. [208554056]
More info